> ## Documentation Index
> Fetch the complete documentation index at: https://docs.sigbergaudio.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Inkognito wall mount

> How to install the optional wall mount for the Inkognito subwoofer.

The optional wall mount lets you install the Inkognito subwoofer on the wall, with the driver side facing the wall.

The wall mount consists of one part that is mounted to the wall, and one part that is mounted to the subwoofer. The result is a subwoofer that is easily and securely installed on-wall. The part that is mounted on the subwoofer is dipped in PVC to minimize vibrations.

The subwoofer slides easily and securely in place in the mount, with no tools required to mount or unmount the subwoofer from the wall.

![The two parts of the Inkognito wall mount: a black part for the subwoofer and a silver part for the wall](https://mintcdn.com/sigberg-audio/ylbq2vOvwhtMMc9b/images/subwoofers/wall-mount-parts.jpg?fit=max\&auto=format\&n=ylbq2vOvwhtMMc9b\&q=85\&s=7679e38c09220c84f9b94d33bd9511a9)

The two parts of the wall mount. The black part is attached to the subwoofer, and the silver part is attached to the wall.

## What you need

| Item | Included |
| - | - |
| Wall part and subwoofer part of the wall mount | Yes |
| Bolts for attaching the subwoofer part to the subwoofer | Yes |
| 2 silicone feet | Yes, use two of the feet included with the subwoofer |
| 4 screws, 6 mm, for attaching the wall part to the wall | No. Use screws appropriate for the material in your wall. |
| Drill, spirit level and screwdriver | No |

> [!WARNING]
>
> Inkognito weighs 22 kg. Make sure the wall and the screws you choose can safely carry the weight of the subwoofer.

> [!NOTE]
>
> As the subwoofer is relatively heavy, it might be a good idea to be two persons during installation, especially if the subwoofer is to be mounted high on the wall.

> [!TIP]
>
> The two parts of the wall mount are connected together the right way in the box. Pay attention to how they fit together before you take them apart. This shows you which way up the wall part goes.

## Mounting holes on the subwoofer

On the back of the subwoofer there are four mounting holes:

* **The two upper holes** are used to bolt the subwoofer part of the wall mount to the subwoofer.
* **The two lower holes** are used to install two of the included silicone feet.

The silicone feet ensure that the subwoofer rests level against the wall, with the bottom half resting against the wall on the feet. This further decouples the subwoofer from the wall.

![Back of the Inkognito showing the two upper holes for the wall mount and the two lower holes for silicone feet](https://mintcdn.com/sigberg-audio/ylbq2vOvwhtMMc9b/images/subwoofers/wall-mount-holes.svg?fit=max\&auto=format\&n=ylbq2vOvwhtMMc9b\&q=85\&s=5bca84e5819e6f3eb037a6d23ebff993)

## Installation

**1. Attach the subwoofer part**

Bolt the subwoofer part of the wall mount to the two upper holes on the back of the subwoofer, using the included bolts. Don't tighten too hard.

**2. Install the silicone feet**

Attach two of the included silicone feet in the two lower holes on the back of the subwoofer.

**3. Mount the wall part**

Mark the four holes on the wall, using a spirit level to make sure they are on one horizontal line. Drill and attach the wall part with four 6 mm screws suited to your wall. Make sure the wall part is the same way up as when it was connected to the subwoofer part in the box.

![Drilling template: four holes on one line, 470 mm between the outer holes and 400 mm between the inner holes](https://mintcdn.com/sigberg-audio/ylbq2vOvwhtMMc9b/images/subwoofers/wall-mount-drilling-template.svg?fit=max\&auto=format\&n=ylbq2vOvwhtMMc9b\&q=85\&s=5469c461736d0377c0dce015959c8069)

| Measurement | Value |
| - | - |
| Distance between the two outer holes | 470 mm |
| Distance between the two inner holes | 400 mm |
| Hole diameter in the wall part | 6.5 mm (fits 6 mm screws) |

**4. Hang the subwoofer**

Lift the subwoofer and gently lower it onto the wall mount. The subwoofer slides into place, with no tools required.

Now the only way to disconnect it from the wall is to lift it upwards. This means it is essentially locked in place and secure from any mishaps.

![Side view of the Inkognito hanging on the wall mount, with the silicone feet resting against the wall](https://mintcdn.com/sigberg-audio/ylbq2vOvwhtMMc9b/images/subwoofers/wall-mount-side-view.svg?fit=max\&auto=format\&n=ylbq2vOvwhtMMc9b\&q=85\&s=2943a3f349b413259d13389e10aca1e8)

## Removing the subwoofer

To take the subwoofer down, lift it straight up until it is free of the wall part. No tools are required.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.