Skip to main content

Amplifier overview

All connections and controls are on the amplifier panel on the back of the subwoofer. Inkognito uses the Hypex FA251 amplifier and 10D uses the Hypex FA501. The layout of the controls is the same on both.
Subwoofer amplifier panel with numbered connections, gain knob, status LEDs, select button, mains inlet and power switch
Photo of the Inkognito amplifier panel
Photo of the 10D amplifier panel

Powering on and off

We recommend leaving the subwoofer on, unless it will not be used for an extended period of time.
Always make sure the subwoofer is powered OFF before connecting or disconnecting cables.

Gain

Default position is directly up (“12 o’clock”). The gain can be offset up to 12 dB in each direction from the default position to match the gain of your speakers or power amplifier.

Presets

3 EQ presets are available to adjust the frequency range of the subwoofer. See Presets for more information. Click the select button on the back of the subwoofer to switch between presets. The green LED lights marked P1 / P2 / P3 will indicate the active setting.